Cleaning Bathroom Tile
Cleaning Bathroom Tile To Remove All Stains And Dirt Cleaning bathroom tile can be a time consuming and sometimes a very dirty job. Here are tips how to clean ceramic tile for your house cleaning business. Everyone knows that bathroom tile can really get dirty and is one of the dirtiest jobs when it comes to cleaning a house. Besides mold and mildew there are also mineral deposits from water, body oils and soap scum that need to be removed.An easy trick to removing mildew and mold on ceramic tile is to make a cleaning solution of... When cleaning bathroom tile it may be necessary to use a commercial mildew and mold remover for very heavy mildew stains. The ingredients in some commercial tile cleaners can be caustic. If you use a commercial cleaner use gloves and protective eyewear. For heavy mildew and mold stains when cleaning bathroom tile straight chlorine bleach can be used. Using bleach gives extra strength bleaching power. Wipe the tile surface with and leave on for about 15 minutes. After 15 minutes rinse and if necessary scrub with a brush with some diluted bleach. Be sure to wear rubber gloves! Mildew and mold grows in any area that has a moist environment and high humidity. There are ways to prevent the reoccurrence of mildew and mold especially in the grout. Check to see if the tile's grout is properly sealed. If you see cracks or missing grout, you'll know that water can get behind the tiles which causes all sorts of damage. Commercial grout sealer is water repellent and this stops water from seeping into cracks. Mildew and mold will not grow in dry and clean grout.Another product that can be used to repel water from the grout is clear silicone waterproofing. When cleaning bathroom tile regular cleaning can be done with water and detergent if a silicone water repellant has been used. Rinse thoroughly.
Any bathroom cleaners or commercial household cleaners should be used according to label instructions. Never use abrasives or scouring powders. These products will scratch the tile finish.Here's how to clean ceramic tile if it has a buildup of a rough white coating (which is often minerals from water, mildew or soap scum). Soap scum can be removed by sponging the tile with a mixture of... Another solution that can be used for the same problem is a solution of one gallon of hot water with 1 or 2 tablespoons of trisodium phosphate, which is a white cleaning powder you can get at most hardware stores. Rinse well with clean water. Alternately, you can wipe the soap scum with a liquid laundry detergent. Use full strength (not diluted). Let this stand for a couple hours, then sponge off with clean water. To remove mildew try using a diluted solution of chlorine bleach and water. Follow label instructions on the bleach and again rinse with clean water. Sometimes there is a rough white coating that appears on bathroom tile. This is a mineral build up from hard water. Remove mineral build up with a commercial tile cleaner. |